sales@optronix.in +91-9811308000

GEPON-EX-1102

GEPON-EX-1102

2PON OLT is the EPON OLT optical line terminal equipment. It can support 2 EPON PON ports and connect 128 ONU at most (by 1:64 splitter), and provides 2 uplink GE optic SFP slots and 2 uplink copper SFP slots.

Item Parameter Specification
Ports Uplink Port QTY:4
    Physical interface:
    10/100/1000M auto-negotiable,RJ45:2pcs;
    GE SFP ,1000BASE-LX :2pcs
     
  PON Port QTY:2
Physical Interface:SFP Slots Connector Type
    1000BASE-PX20+ Max splitting ratio:1:64
  Management Port 1*10BASE-T out-band management port
1*Console management port
  OLT PON SFP Transmission Distance:20KM
PON port speed: symmetrical 1.25Gbps
Waves: 1490nm TX,1310nm
RX TX Optical power : +2~+7dBm RX Sensitivity: -28dBm
  Management Mode SNMP,Telnet,CLI
Support EMS centralized management based on C-
Data development interface independently.
Management Management Function Fan Group Detecting
Port Status monitoring and configuration management;
Layer-2 switch configuration such as Vlan, Trunk ,RSTP,IGMP ,QOS, etc;
EPON management function: DBA ,ONU authorization, ACL ,QOS ,etc;
Online ONU configuration and management User management
Alarm management
Functionality Layer-two Switch Support port VLan and protocol Vlan
Support Vlan tag/Untag ,vlan
transparent transmission;
Support 4096 VLAN
Support 802.3dd trunk
RSTP
QOS based on port ,VID,TOS and MAC
Address IGMP Snooping
802.x flow control
Port stability statistic and monitoring
  EPON Function Support port-based rate limitation and bandwidth control;
In compliant with IEEE802.3ah Standard
Up to 20KM transmission Distance
Support data encryption, group broadcasting, port
Vlanseparation ,RSTP,etc.
Support Dynamic Bandwidth Allocation (DBA)
Support ONU auto-discovery/Link detection/remote
upgrade of software;
Support VLAN division and user separation to avoid broadcast storm;
Support various LLID configuration and single LLID configuration .Different user and different service could provide different QoS by means of different LLID channels.
Support power-off alarm function ,easy for link problem detection
Support broadcasting storm resistance function Support port isolation between different ports Support ACL and SNMP to configure data packet filter flexibly
Specialized design for system breakdown prevention to maintain stable system
Support dynamic distance calculation on EMS online Support RSTP,IGMP Proxy 440mmX208mmX44mm
  Dimension (LxWxH)
  Weight GW:4kg , NW:3KG
Physical Features Power Supply 90~264VAC
  Consumption 16W
  Operating Environment Working Temperature: 0~50℃
Storage Temperature: -40~85℃
Relative Humidity: 5~90%(non-condensing)
  • High Stability with low cost and flexible networking construction
  • Two fixed PON slots with 1:64 splitting ratio at most
  • It could support 128 ONU maximally
  • Maximum Transmission distance:20km (1:32 splitting ratio)
  • Comprehensive Network Management
  • In band and out band management;
  • Support Telnet and local command lines management; 
  • EMS management based on standard SNMP protocol;
  • Support online upgrading.
  • Powerful QOS Functions
  • Realize stable and efficient dynamic bandwidth allocation (DBA)
  • Various OAM Functions
  • ONU auto‐detection and registration;
  • Support LGMP and Snooping function;
  • Support port flow control and flow shaping.
  • Perfect to layer2 convergence exchange
  • Support multiple uplink port and through the port bound function
  • Support for the user provide optical and copper uplink port SFP slot access
  • Download PDF